In any operating system, a webcam is an essential part. However, if it becomes a problem, it might cause delays in a number of vital duties. The Webcam Keeps Turning Off and On Again is a regular problem with the computer’s camera.
Many customers have recently complained about the Webcam Turning Off and On Again issue. According to reports, the issue occurs when the user’s webcam keeps turning off and on every few seconds. There could be a number of factors that cause this, but we have a no-fail solution for every one of them. Take a peek at:
How To Fix Webcam keeps turning off and on again on Windows 11/10
Consider these easy solutions and see if they help before trying the deeper fixes in the article below:
- Check to see if the Webcam isn’t configured as the streaming application’s default ‘video in.’
- Also, see if the camera is compatible with another computer.
- Finally, make sure the camera is linked to the system directly, without the use of an extension cable or a connecting hub.
FIX 1: Run an Antivirus/Malware Scan:
If your Webcam keeps turning off and on, it’s because your computer has been exposed to the virus or malware. The best solution is to run an Antivirus/Malware Scan, which will most likely repair the issue while also protecting your system from a variety of other possible faults. Follow the steps below to perform an anti-virus/malware scan:
Note: If you are unable to run an antivirus/malware scan, it is recommended that you boot your computer into safe mode and then run the scan again.
1. First, disconnect your system from the internet and then run a Disk Clean-up. Remove Temporary files, Temporary internet files, and Offline webpages from your computer.
2. Now, using any reputable third-party program available online, run an Antivirus scan.
3. The “Webcam Keeps Turning Off and On” issue will be immediately resolved after the scanning process is completed. However, if a virus or other detection is discovered during the scan, it is recommended that you contact professionals for further assistance.
FIX 2: Install all the latest updates for Windows, Drivers, BIOS of Your System:
Incompatibility with the operating system’s module can be caused by old elements such as Windows, Drivers, and the BIOS, resulting in difficulties like “Webcam Keeps Turning Off and On.” It is recommended that you install all of the newest updates for the same. Follow the steps below to get started:
For updating Windows:
1. To begin, put Check for Updates into the desktop search bar and hit Enter. With the Windows update screen, it will open the Settings app.
2. Select the Check for Updates tab from the right-pane menu. Your system will automatically search for and install any available updates. It’s possible that the procedure will take a long time.
3. Restart your computer when the update installation process is done.
Furthermore, you can update individual teams from the Device Manager window, and the BIOS from its own dedicated setting.\
FIX 3: Disable Power Saving for the Camera’s USB Port:
The Webcam Keeps Turning Off and On problem can be caused by your system’s configuration turning off the Camera’s USB port. In order to remedy the issue, it is recommended that the power saving for the Camera’s USB port be disabled. Follow the steps outlined below to do so:
1. To begin, hit Windows + X, then select Device Manager from the Quick access menu.
2. Expand the option Universal Serial Bus Controllers in the Device Manager window and locate the USB port to which the Camera is connected. In this case, the user may need to disable each port one by one in order to discover the correct camera port.
3. Furthermore, right-click on the correct camera port and pick Properties from the sub-menu.
4. Then, in the Properties window, go to the vertical menu and select Power Management, then uncheck the check box next to Allow the Computer to Turn Off This Device to Save Power.
5. At last, restart your computer to apply the changes, and then check to see if the Camera is working properly.
FIX 4: Update / Reinstall the Windows 10 Camera App:
The Webcam Keeps Turning Off and On issue can also be caused by an outdated Windows 10 Camera App. Users who have experienced the same problem say that updating, restarting, or reinstalling the Camera App on Windows 10 may fix the problem.
Note: Before you start, ensure your system does not have any other third-party camera apps installed. If that’s the case, consider uninstalling it first.
For updating the Camera App:
1. To begin, type Camera into the desktop search bar, and then select the Camera app from the search results.
2. Moreover, right-click on it and choose Share from the Sub-menu. It will take you to the Microsoft Store website.
3. Skip the Share screen (if it’s displayed) and check to see whether there’s an update for the Camera app. Consider updating the Camera app if it’s available, then restart your computer once it’s finished.
Reset the Camera App to Default:
1. To begin, type Camera into the desktop search bar, and then select the Camera app from the search results.
2. Moreover, right-click on it and choose App settings from the Sub-menu.
3. After that, go to the Settings window and click the Terminate tab, then the Reset tab.
4. At last, confirm that you want to Reset the Camera app and restart your computer.
Reinstall the Camera App:
1. To get started, right-click the Windows start logo and choose Windows PowerShell (Admin) from the context menu.
2. Execute the following command on the PowerShell window and then click Enter.
Get-AppxPackage Microsoft.WindowsCamera | Remove-AppxPackage
3. Restart your computer after the Camera app has been deleted. Additionally, either reinstall the Camera app from the Microsoft Store or run the following command in Windows PowerShell (Admin):
Get-AppxPackage – allusers Microsoft.WindowsCamera | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}
4. Lastly, restart your computer after reinstalling the Camera app to see if the issue has been repaired.
FIX 5: Reinstall the Camera Driver:
When your Camera driver installation is corrupt, it can cause the Webcam to constantly go off and on. It is recommended that you reinstall the Camera driver and see if it helps. Follow the steps outlined below to do so:
Note: Before you begin, make sure you have the most recent version of the camera driver from the OEM website.
1. To get started, right-click the Windows start button and pick Device Manager from the context menu.
2. Expand the Cameras option in the Device Manager window, then right-click on your Camera. Select Uninstall from the drop-down menu and tick the checkbox next to Delete the Driver Software for This Device.
3. After that, press the Uninstall button and wait for the procedure to finish.
4. Go to the View menu from the top vertical bar on the Device Manager main panel once more, and then pick the option Show Hidden Devices.
5. Remove any rogue devices, such as audio, video, and camera devices. Additionally, if another camera is visible in the Device Manager window, try uninstalling it.
6. Restart your computer. All missing drivers, including the Camera driver, will be installed automatically by Windows. However, if you don’t have access to a computer, you can perform the same thing manually.
Then, check to see if the problem has been resolved.
FIX 6: Rename the RsProviders Folder:
RsProviders is an important folder for the Camera app, and if it becomes faulty, you may experience the “Webcam Keeps Turning Off and On Again” problem. Although the folder is not accessible to all users, if you have it, consider renaming it and seeing if it helps. Follow the steps outlined below to do so:
1. To begin, hit Windows + R simultaneously to open the Run dialogue box.
2. Enter or copy + paste the following command into the empty text space at the Run prompt, then press Enter.
\Program Files\Realtek
3. Right-click over the RsProviders folder on the next screen and choose Rename from the sub-menu. Rename the folder to RsProviders_backup something along the same lines. However, if you are unable to do so, try to force close the Realtek process in Task Manager and then attempt to rename it again.
4. After that, restart your computer to see if the problem has been repaired.
5. If the problem persists, make sure the above-mentioned folder is renamed, and then consider copying the identical files from another trusted source.
6. Finally, restart your computer to see if the problem has been repaired or not.
FIX 7: Disable the Access to the Camera:
When any of the system’s processes/applications access the Camera, it may cause the “Webcam Keeps Turning Off and On Again” problem. It is recommended that you block Camera access in the privacy settings. Follow the steps outlined below to accomplish this:
1. To get started, right-click the Windows start button and choose Settings from the context menu.
2. Browse to Privacy in the Settings window. Browse to the option Camera on the left-pane menu inside the Privacy panel.
3. Then, under the Camera Access for This Device section of the right-pane menu, select the Change tab and toggle off the blue switch to disable it.
4. Toggle off the switch under Allow Apps to Access Your Camera to disable it.
5. Next, under the Allow Desktop Apps to Access Your Camera option, toggle off the switch to turn it off.
6. Last, restart your system to see whether it has made a difference.
NOTE: Check to see if your Original Equipment Manufacturer (OEM) applies any software to manage the devices and their access. Also, see if limiting access to the camera in the utility settings solves all of the camera app’s problems. However, if this is not the case, disable the Camera in the BIOS or Task Manager. You may also need to enable the Camera when you need to utilize it.
FIX 8: Disable/Remove the Conflicting Applications:
Whenever a software or application causes a disagreement with the camera settings, the Webcam Keeps Turning Off and On Again problem is likely to occur. Disabling or deleting the applications is the best solution in this case. Follow the steps outlined below to accomplish this:
To locate the problematic processes/ applications:
- Performing a system clean boot is considerable. It will be sufficient to resolve the problem on its own.
- If the issue is fixed, possibly enhance the processes/applications that were disabled during the Clean boot process. Enable one by one until you locate the person accountable for causing the quarrel and causing the problem.
Once you’ve identified the issue processes/applications, you can implement any of the fixes listed below:
- Go to the Task Manager and terminate the application process.
- Uninstall the program.
- Consider turning off the Camera-related features in that app.
- You can interrupt the application during system initialization.
FIX 9: Edit the System’s Registry:
If it does not have any preceding solutions that worked for you, we propose that you alter the system registry. To do so, follow the steps outlined below:
Note: It is recommended that you back up your system’s registry before beginning the instructions.
1. To begin, go to the Windows search bar and type Registry Editor.
2. Then, go to the relevant search result, right-click it, and choose Run as Administrator.
3. Navigate to the following path in the registry editors window,
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Media Foundation\Platform
4. Then, in the left pane menu, right-click Platform and then pick New > Dword (32-bit) Value.
5. Change the value to Numeric 0 and rename the folder EnableFrameServerMode.
6. Repeat the operation in the following path as well,
HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows Media Foundation\Platform
7. Afterward, restart your computer, and the problem should be resolved.
All of them are tried, tested, and confirmed solutions for the “Webcam Keeps Turning Off and On Again” problem. It may be a common problem, but it can have a significant impact on various vital tasks performed by users.
In this video, we are gonna show you how to fix webcam keeps turning off and on again on Windows 10:
If none of the above-mentioned fixes worked for you, it is likely that the problem is hardware-related, and it is best to contact a hardware professional as soon as possible to get it resolved. If you have any questions or comments, please leave them in the comment box below.
